CirculenRenew C14 LD2420D

LyondellBasell

Description

CirculenRenew C14 LD2420 D is part of the Circulen© product family of circular and sustainable solutions. CirculenRenew C14 polymer reduces the carbon footprint as it replaces fossil feedstock through using renewable raw materials made from bio-based waste and residue oils. The renewable content of CirculenRenew C14 is measured by an accredited third party laboratory and stated as a parameter on the Certificate of Analysis (CoA).

CirculenRenew C14 LD2420 D is a drop-in solution and therefore doesn’t require any adaptation of the existing processing equipment.
CirculenRenew C14 LD2420 D is a non-additivated, low density polyethylene. It is characterized by a high melt strength leading to a good bubble stability during blown film extrusion. It is delivered in pellet form.

This product is not intended for use in medical and pharmaceutical applications.

Availability

Africa-Middle East, Asia-Pacific, Europe

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (190 °C/2.16 kg) 0.25 g/10 min
Density 0.923 g/cm³
Tensile Modulus 260 MPa
Tensile Stress at Yield 10 MPa
Dart Drop Impact Strength, F50 250 g
Tensile Strength MD 27 MPa
Tensile Strength TD 25 MPa
Tensile Strain at Break MD 200 %
Tensile Strain at Break TD 500 %
Coefficient of Friction >0.8
Failure Energy 6.5 J/mm
Vicat Softening Temperature (A/50) 96 °C
Peak Melting Point 110 °C
Haze (50 µm) <14 %
Gloss (20°) >15
Gloss (60°) >50

Technical Data Sheet

Technical Data Sheet

Process

Blown Film


Resin

Low Density Polyethylene


Applications

Agriculture Film, Bags & Pouches, Heavy Duty Packaging, Liner Film, Shrink Film, Stretch Hood