Hifax BA35HC BLK P23894 is an injection moldable Underwriter’s Laboratories listed low halogen V-2 material with good impact resistance and an LOI of 28%. It’s suitable for small appliance housings and parts, as well as electrical insulation applications.
Hifax BA35HC BLK P23894
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 4.0 g/10 min |
| Density | 0.94 g/cm³ |
| Flexural Modulus (23 °C) | 1150 MPa |
| Tensile Stress at Yield (23 °C) | 25 MPa |
| Rockwell Hardness (R-Scale) | 85 |
| Flame Rating - UL (1.5 mm) | V-2 |
| Mold Shrinkage | |
| Limiting Oxygen Index | 28 % |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Appliances
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications