Moplen EP5079

LyondellBasell

Description

Moplen EP5079 is a fractional melt flow heterophasic copolymer with very low gel and low odor, good stiffness impact balance, and good heat resistance. Typical customer applications are multilayer packaging, high heat resistance thermoforming tray, blow molding for cosmetic and detergent bottles, extrusion sheets with high gloss.

Availability

Africa-Middle East, Asia-Pacific, Australia and New Zealand

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 0.5 g/10 min
Density 0.90 g/cm³
Flexural Modulus 1700 MPa
Tensile Strength at Yield 34 MPa
Tensile Elongation at Yield 11 %
Notched Izod Impact Strength (23 °C) No Break J/m
Rockwell Hardness (R-Scale) 100
Vicat Softening Point 150 °C
Deflection Temperature Under Load (0.46 N/mm²) 120 °C

Technical Data Sheet

Technical Data Sheet - ASTM

Process

Extrusion Blow Molding, Thermoforming


Resin

Polypropylene, Impact Copolymer


Applications

Bottles For Consumer Goods, General Sheet Extrusion, Opaque Containers, Thermoformed Food Containers