Diamond ABS TR7 1609BLK is a Acrylonitrile Butadiene Styrene material and is typically used in Extrusion, Injection Molding applications. Features include: Good Dimensional Stability, Good Flow, High Heat Resistance, High Stiffness, Paintable, and Platable.
ABS TR7 1609BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (220 °C/10.0 kg) | 4.9 g/10 min |
| Melt Flow Rate (230 °C/3.8 kg, Procedure A) | 1.6 g/10 min |
| Density - Specific Gravity | 1.08 g/cm³ |
| Tensile Strength at Yield (50 mm/min) | 43.0 MPa |
| Tensile Stress at Yield | 41 MPa |
| Flexural Modulus (Injection Molded, Chord) | 2340 MPa |
| Flexural Modulus (1.3 mm/min, Procedure B, Method I (3 point load), 1% Secant) | 2130 MPa |
| Charpy Impact Strength - Notched (23 °C) | 17 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 9.5 kJ/m² |
| Notched Izod Impact Strength (23 °C) | 19 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 9.5 kJ/m² |
| Notched Izod Impact (-30 °C) | 110 J/m |
| Notched Izod Impact (23 °C, Method A) | 200 J/m |
| Rockwell Hardness (R-Scale) | 111 |
| Rockwell Hardness (R-Scale) | 111 |
| Vicat Softening Temperature | 122 °C |
| Vicat Softening Temperature (Loading 1 (10 N)) | 125 °C |
| Deflection Temperature Under Load Unannealed (0.45 MPa) | 111 °C |
| Deflection Temperature Under Load Unannealed (1.80 MPa) | 94.6 °C |
| Deflection Temperature Under Load Unannealed (264 psi) | 94.3 °C |
| Deflection Temperature Under Load Unannealed (66 psi) | 110 °C |
| Coefficent of Linear Thermal Expansion (CLTE), Flow (TMA) | 7.8E-05 cm/cm/°C |
| Coefficent of Linear Thermal Expansion (CLTE), Perpendicular (TMA) | 9.1E-05 cm/cm/°C |
| Drying Time | 2.0 to 4.0 hr |
| Drying Temperature | 82 to 90 °C |
| Suggested Max Moisture | 0.1 % |
| Front Temperature | 200 to 250 °C |
| Middle Temperature | 200 to 250 °C |
| Rear Temperature | 200 to 250 °C |
| Injection Rate | Moderate-Fast |
| Mold Temperature | 40 to 80 °C |
Technical Data Sheet
Technical Data Sheet - APS InjectionProcess
Extrusion, Injection Molding
Resin
Acrylonitrile Butadiene Styrene
Applications
Appliances, Automotive Exterior Parts, Automotive Interior Trim