Alcryn 2090BKBLK is a Melt Processable Rubber material and is typically used in Blow Molding, Compression Molding, Extrusion, Injection Molding applications. Features include: Good Weather Resistance, High Flow, High Heat Resistance, Noise Damping, Oil Resistant, Ozone Resistant, UV Resistant, and Vibration Damping.
ALCRYN 2090BKBLK
Description
Availability
Asia-Pacific, Europe, North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Density | 1.17 g/cm³ |
| Density - Specific Gravity | 1.17 g/cm³ |
| Change in Volume (in ASTM #1 Oil, 100 °C, 168 hr) | -10 % |
| Change in Volume (in Reference Fuel B, 24 °C, 168 hr) | 36 % |
| Change in Volume (in ASTM #3 Oil, 100 °C, 168 hr) | -23 % |
| Tensile Modulus (1.91 mm, Compression Molded) | 6.41 MPa |
| Tensile Modulus (1.91 mm, Compression Molded) | 6.41 MPa |
| Tensile Stress at Yield (1.91 mm, Compression Molded) | 10.8 MPa |
| Tensile Strength at Yield (1.91 mm, Compression Molded) | 10.8 MPa |
| Tensile Strain at Break (1.91 mm, Compression Molded) | 320 % |
| Tensile Set | 13 % |
| Clash-Berg Modulus (-21 °C) | 68.9 MPa |
| Tensile Elongation at Break (1.91 mm, Compression Molded) | 320 % |
| Tear Strength (24 °C, Die C) | 44.7 kN/m |
| Durometer Hardness (Shore D, 1.91 mm, Compression Molded) | 40 |
| Compression Set (24 °C, 22 hr, Method B) | 27 % |
| Compression Set (100 °C, 22 hr, Method B) | 74 % |
| Compression Set (24 °C, 22 hr) | 27 % |
| Compression Set (100 °C, 22 hr) | 74 % |
| Taber Abrasion Resistance (CS-17 Wheel, 1000 g, 1000 Cycles) | 3.00 mg |
| Processing (Melt) Temp | 177 °C |
Process
Blow Molding, Compression Molding, Extrusion, Injection Molding
Resin
Melt Processable Rubber
Applications
Cable Jacketing, Engineering Parts, Fabrics, Gaskets, Handles, Hose, Seals, Sheet, Tubing, Weatherstripping, Wire Jacketing