Dexflex D45 BLK AP is a thermoplastic olefinic elastomer (TPO) that is typically used for automotive exterior applications that require excellent low-temperature properties and excellent weatherability.
Dexflex D45 BLK AP
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 13.0 g/10 min |
| Density (23 °C) | 0.92 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1150 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 22 MPa |
| Multi-axial Impact Strength (23° C, 2.2 m/s, 3.2 mm plaque) | 20 J |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications