HOSTACOM TRC 364NA 8R73 SEIDENBE high melt flow, high modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin. It is typically used for interior trim applications and displays exceptional scratch and mar resistance, low stress whitening, and low emissions.
HOSTACOM TRC 364NA 8R73 SEIDENBE
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 17 g/10 min |
| Density (23 °C) | 1.03 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min, Chord) | 1800 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 21 MPa |
| Tensile Strain at Yield (23 °C, 50 mm/min) | 7 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 40 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications