Hifax TRC 770P G01 BLK high melt flow, 1,600 MPa flexural modulus, UV-stabilized, mineral-filled, precolored thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties and processability. It is typically used for molded-in color automotive bumper fascias.
Hifax TRC 770P G01 BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 28 g/10 min |
| Density (23 °C, Method A) | 1.02 g/cm³ |
| Flexural Modulus (23 °C) | 1600 MPa |
| Tensile Stress at Yield (23 °C) | 19 MPa |
| Tensile Strain at Yield (23 °C) | 7 % |
| Notched Izod Impact Strength (23 °C) | 32 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 5.8 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 97 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications