Hifax TRC 779P 848 high melt flow, 1,650 MPa flexural modulus, UV-stabilized, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties and processability. It is typically used for multiple automotive exterior applications.
Hifax TRC 779P 848
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 25 g/10 min |
| Density (23 °C, Method A) | 1.03 g/cm³ |
| Flexural Modulus (23 °C) | 1650 MPa |
| Tensile Stress at Yield (23 °C) | 16 MPa |
| Tensile Strain at Yield (23 °C) | 4 % |
| Notched Izod Impact Strength (23 °C) | 45 kJ/m² |
| Notched Izod Impact Strength (-30 °C) | 5.5 kJ/m² |
| Multi-axial Impact Strength (-40°C, 2.2 m/s, 3.2 mm plaque) | 23 J |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications