Hifax TYC 1168X GREY very high melt flow for easy and fast molding and has low density, which reduces part weight and improves paint adhesion. Good stiffness and excellent cold temperature impact. It is typically used for fully painted exterior trim and fascia applications.
Hifax TYC 1168X GREY
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 35 g/10 min |
| Density (23 °C, Method A) | 0.98 g/cm³ |
| Flexural Modulus (23 °C) | 1600 MPa |
| Tensile Stress at Yield (23 °C) | 18 MPa |
| Charpy Impact Strength - Notched (23 °C) | 54 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 5.1 kJ/m² |
| Multi-axial Impact Strength (-30 °C, 2.2 m/s, 3.2 mm plaque) | 22 J |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 52 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications