Hifax TYC 1342P YBTA Platinum very high melt flow, 1,650 MPa flexural modulus, low density mineral filled, thermoplastic elastomeric olefin (TEO) resin. Enables part weight reduction and associated savings while maintaining all of the performance of traditional, higher density products. It has excellent UV performance, balance of properties and processability, and is typically used for MIC automotive bumper fascias and exterior trim applications.
Hifax TYC 1342P YBTA Platinum
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 30 g/10 min |
| Density (23 °C, Method A) | 1.01 g/cm³ |
| Flexural Modulus (23 °C) | 1650 MPa |
| Tensile Stress at Yield (23 °C) | 19.2 MPa |
| Charpy Impact Strength - Notched (23 °C) | 38 kJ/m² |
| Charpy Impact Strength - Notched (-40 °C) | 4.1 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications