Hifax TYC 258X NA BLACK is a talc reinforced, impact modified and non UV stabilized polypropylene copolymer for injection molding. It combines an excellent flowability with a low coefficient of linear thermal expansion and very good processability. This grade is typically used for molding of large complex parts that require good dimensional stability. It suitable only for painted parts or parts that have no UV exposure.
Hifax TYC 258X NA BLACK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C, Method A) | 1.13 g/cm³ |
| Flexural Modulus (23 °C) | 2100 MPa |
| Tensile Stress at Yield (23 °C) | 18 MPa |
| Charpy Impact Strength - Notched (23 °C) | 30 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications