Hostacom ERC 161N 600R JET BLACKL is a 15% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness, good scratch resistance and good flowability with good impact and dimensional stability. This grade is typically used for molding of automotive interior trim parts.
Hostacom ERC 161N 600R JET BLACK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 16 g/10 min |
| Density (23 °C) | 1.01 g/cm³ |
| Flexural Modulus (23 °C) | 2400 MPa |
| Tensile Stress at Yield (23 °C) | 28 MPa |
| Charpy Impact Strength - Notched (23 °C) | 7.0 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C) | 3.0 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 110 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 60 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications