Hostacom SP98F/94 P23450 BLK conventional melt flow, 2,200 MPa flexural modulus, mineral-filled thermoplastic elastomeric olefin (TEO) resin has a very good combination of stiffness, impact resistance and surface appearance. It is typically used for large injection molded automotive interior and exterior applications.
Hostacom SP98F/94 P23450 BLK
Description
Availability
Africa-Middle East, Asia-Pacific, Australia and New Zealand, North America, South & Central America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 6 g/10 min |
| Density | 1.13 g/cm³ |
| Flexural Modulus | 2200 MPa |
| Tensile Stress at Yield | 21 MPa |
| Tensile Strain at Break | 25 % |
| Notched Izod Impact Strength (23 °C) | 7.5 kJ/m² |
| Heat Deflection Temperature B (0.45 MPa, Unannealed) | 110 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Exterior Automotive Applications, Instrument Panels, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications