Hostacom TRC 160N HF NATRL is a 14% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness/impact balance, good scratch resistance, low odor and excellent flowability properties with good dimensional stability. It is typically used for molding of automotive interior trim parts.
Hostacom TRC 160N HF NATRL
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 32 g/10 min |
| Density (23 °C) | 1.00 g/cm³ |
| Flexural Modulus | 1800 MPa |
| Tensile Stress at Yield | 20 MPa |
| Notched Izod Impact Strength (23 °C) | 38 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 98 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 55 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications