Hostacom TRC 160Y NATURAL is a 15% mineral filled, polypropylene copolymer for injection molding. It combines excellent stiffness/impact balance, low odor and excellent flowability properties with good dimensional stability. It is typically used for molding paintable automotive interior trim parts.
Hostacom TRC 160Y NATURAL
Description
Availability
Asia-Pacific, Europe, North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 14 g/10 min |
| Density | 1.00 g/cm³ |
| Tensile Modulus (1% Secant) | 1750 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 18 MPa |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 45 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) | 4.5 kJ/m² |
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90 °C |
| Deflection Temperature Under Load (1.80 MPa, Unannealed) | 53 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Interior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications