Icorene 3560 is a linear low density polyethylene specifically developed for rotational moulding. This grade is suitable for use in general purpose applications. It has a good balance of properties such as toughness, easy flow and stiffness.
ICORENE 3560 GRN 6801
Description
Availability
Europe
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (190 °C/2.16 kg) | 5.0 g/10 min |
| Density | 0.935 g/cm³ |
| Environmental Stress Crack Resistance (Condition B, F50, 100% Igepal, 50 °C) | >150 hr |
| Tensile Strength at Yield | 17 MPa |
| Flexural Modulus | 550 MPa |
| Drop Impact Resistance (-20 °C, Internal Method) | 170 J/cm |
| Durometer Hardness (Shore D) | 55 |
| Deflection Temperature Under Load Unannealed (264 psi) | 36 °C |
| Deflection Temperature Under Load Unannealed (66 psi) | 52 °C |
| Peak Melting Temperature | 125 °C |
Technical Data Sheet
Technical Data Sheet - APSProcess
Rotomolding
Resin
Linear Low Density Polyethylene
Applications
Containers, General Purpose, Tanks