22% talc filled PP-Homopolymer with long term heat stabilization, low emissions Former name: Polyfort FPP 22T K1093
POLYFORT FPP22T K1093 UBLK70400
Description
Availability
Africa-Middle East, Asia-Pacific, Europe, Latin America, North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Volume Flow Rate (230 °C/2.16 kg) | 20 cm³/10 min |
| Density (Method A) | 1.07 g/cm³ |
| Tensile Modulus (1 mm/min, Type 1A) | 2650 MPa |
| Tensile Stress at Yield (Type 1A, 50 mm/min) | 29.0 MPa |
| Tensile Strain at Yield (Type 1A, 50 mm/min) | 5.0 % |
| Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) | 3.0 kJ/m² |
| Charpy Impact Strength - Notched (-30 °C, Type 1, Edgewise, Notch A) | 1.5 kJ/m² |
| Charpy Impact Strength - Unnotched (23 °C, Type 1, Edgewise) | 35 kJ/m² |
| Charpy Impact Strength - Unnotched (-30 °C, Type 1, Edgewise) | 15 kJ/m² |
| Ball Indentation Hardness (H 358/30) | 80.0 MPa |
| Ball Pressure Test (125 °C) | Pass |
| Vicat Softening Temperature (B (50N), 50 °C/h) | 86.0 °C |
| Vicat Softening Temperature (A (10N), 50 °C/h) | 151 °C |
| Deflection Temperature Under Load Unannealed (0.45 MPa) (Flatwise) | 120 °C |
| Deflection Temperature Under Load Unannealed (1.80 MPa) (Flatwise) | 70.0 °C |
| Volume Resistivity | 10000000000000 ohm*m |
| Surface Resistivity | 1E+15 ohm |
| Burning Rate (2.00 mm) | <100 mm/min |
| Burning Rate (2.00 mm) | <100 mm/min |
| Glow Wire Flammability Index (1.5 mm) | 725 °C |
| Glow Wire Flammability Index (3.0 mm) | 725 °C |
| Glow Wire Ignition Temperature (1.5 mm) | 750 °C |
| Glow Wire Ignition Temperature (3.0 mm) | 750 °C |
| Drying Time | 2.0 to 3.0 hr |
| Drying Temperature | 80 °C |
| Processing (Melt) Temp | 220 to 260 °C |
| Injection Rate | Moderate-Fast |
| Mold Temperature | 30 to 60 °C |
| Flammability Classification (1.5 mm) | HB |
| Flammability Classification (3.0 mm) | HB |
Technical Data Sheet
Technical Data Sheet - APS InjectionProcess
Injection Molding
Resin
Polypropylene, Homopolymer