Purell HP570P

LyondellBasell

Description

Purell HP570P is a polypropylene homopolymer for use in injection molding applications
Purell HP570P exhibits a good flow properties combined with a high stiffness.
Purell HP570P is extensively applied in medical device components, labware and closures. Additionally it is used in general injection molding thin-walled warpage-critical applications.
All potential activities for applications in the pharmaceutical, medical device, laboratory and diagnostics area have to be discussed with the relevant Technical and Business contacts first. To discuss a medical/pharmaceutical application please contact your local Lyondellbasell reference or your local Distributor.

Availability

Africa-Middle East, Asia-Pacific, Australia and New Zealand, Europe, North America, South & Central America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 16 g/10 min
Density (23 °C) 0.90 g/cm³
Tensile Modulus 1400 MPa
Tensile Stress at Yield 33 MPa
Tensile Strain at Break >50 %
Tensile Strain at Yield 11 %
Charpy Impact Strength - Notched (23 °C, Type 1, Edgewise, Notch A) 3.0 kJ/m²
Ball Indentation Hardness (H 358/30) 74 MPa
Vicat Softening Temperature (A50) 154 °C
Heat Deflection Temperature B (0.45 MPa, Unannealed) 85 °C

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene, Homopolymer


Applications

Diagnostic Applications, Healthcare Applications, Labware, Syringes