Sequel 1780 BLK engineered polyolefin is typically used for mold-in-color or partially painted automotive exterior applications that require dimensional stability over a broad temperature range with enhanced scratch and mar resistance. This material exhibits excellent processability and low-temperature properties.
Sequel 1780 BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 20 g/10 min |
| Density (23 °C) | 1.02 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 1500 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 20 MPa |
| Multi-axial Impact Strength (23° C, 2.2 m/s, 3.2 mm plaque) | 16 J |
| Deflection Temperature Under Load (66 psi, Unannealed) | 88 °C |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications