Sequel 1835-AX BLK thermoplastic polyolefin material is typically used for large automotive exterior applications requiring a high flexural modulus, good impact properties, very low CLTE, and excellent paintability. This material has a high melt-flow rate for enhanced injection molding processability.
Sequel 1835-AX BLK
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 19 g/10 min |
| Density (23 °C) | 1.16 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 3000 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 24.9 MPa |
| Tensile Strain at Break (23 °C, 50 mm/min) | 13 % |
| Charpy Impact Strength - Notched (23 °C) | 9.3 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Exterior Automotive Applications
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications