Sequel E3400-1 UV NAT fractional melt flow, high flexural modulus thermoplastic polyolefin (TPO) is typically used for thermoformed exterior or interior applications that require low-temperature toughness and dimensional stability. This extrusion-grade material exhibits enhanced melt strength for a wide thermoforming processing window.
Sequel E3400-1 UV NAT
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 0.6 g/10 min |
| Density (23 °C) | 1.12 g/cm³ |
| Flexural Modulus (23 °C, 2 mm/min) | 2000 MPa |
| Tensile Stress at Yield (23 °C, 50 mm/min) | 21 MPa |
| Multi-axial Impact Strength (-15 °C, 2.2 m/s, 3.2 mm plaque) | 24 J |
Technical Data Sheet
Technical Data SheetProcess
Extrusion Flat-die, Thermoforming
Resin
Polypropylene Compounds
Applications
Industrial, Panels & Profiles
Prohibited Applications of Compounded Polyolefins:
The following applications and/or end uses are prohibited by LyondellBasell. LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:
FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications