Vitamide AB76BK H4 3323/1 760445 is a Polyamide 66 Glass Bead, 30% filled material and is typically used in Injection Molding applications. Features include: Good Glycol Resistance, Heat Stabilized, Oil Resistant, and UV Resistant.
VITAMIDE AB76BK H4 3323/1 760445
Description
Availability
Africa-Middle East, Asia-Pacific, Europe, Latin America, North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Density | 1.35 g/cm³ |
| Tensile Modulus | 4390 MPa |
| Tensile Stress at Break | 73 MPa |
| Tensile Strain at Break | 3.2 % |
| Flexural Modulus | 3430 MPa |
| Flexural Stress | 130 MPa |
| Charpy Impact Strength - Notched | 3 kJ/m² |
| Charpy Impact Strength - Unnotched | 16 kJ/m² |
| Deflection Temperature Under Load Unannealed (0.45 MPa) | >184 °C |
| Deflection Temperature Under Load Unannealed (1.80 MPa) | 66 °C |
| DSC Melting Point | 260 °C |
| Dielectric Strength (2.00 mm) | 30 kV/mm |
| Comparative Tracking Index (CTI) (Solution A) | 450 V |
| Surface Resistivity | 10000000000000 ohm |
| Glow Wire Flammability Index | 725 °C |
| Glow Wire Ignition Temperature | 675 °C |
| Drying Time | 3.0 to 4.0 hr |
| Drying Temperature | 80 °C |
| Processing (Melt) Temp | 280 to 300 °C |
| Mold Temperature | 60 to 120 °C |
| Flame Rating | HB |
Technical Data Sheet
Technical Data Sheet - APS InjectionProcess
Injection Molding
Resin
Polyamide 66
Applications
Automotive Under the Hood